ANTEK 10KW

ANTEK 10KW

Fireplace ANTEK whole cast of cast iron, large deflector vermiculite. It has a built-in pre-damper system, clean the glass, which prevents excessive okopcaniu the windows, so that the cartridge gets an additional amount of air used at the post-combustion flue gas. sleek and aesthetic handle and knobs damper and ash pan, heat resistant glass. Single-door and ash pan contributions are sealed graphite rope, allowing continuous operation of the fireplace. Fireplace Inserts ANTEK has the necessary systems of work, ie 1 The combustion air controller 2 Deflector 3 The damper fixing the thrust of the chimney (damper) 4 Ash drawer. 5 Air jacket on the glass front is made entirely of cast iron Class 200 wall thickness of the furnace is not less than 8mm. Heat-resistant glass ceramic. The door and ash pan contributions are sealed graphite rope, allowing continuous operation of the fireplace.

Catalog

Category: .

Fireplace, air power of 10 kW heats an area of 100 m², is made of cast iron, weighs 94 kg. The glass has a flat shape, and the fireplace insert is decorated in a modern style. The door opens to the left. Diameter of the pipe is 180 mm and the same exhaust outlet is located at the top. Fireplace ANTEK 10 kW -fired oven. Sizes fireplace insert ANTEK 10 kW are as follows: total width – 600 mm (width of the facade – 652 mm); total height – 622 mm (height of the facade – 523 mm); głębkość – 435 mm. device features high energy efficiency: 61.70% and low emissions of CO, which is only 0.61%. The flue gas temperature is 352 ° C. Fireplace ANTEK 10 kW characterized by continuous combustion. The combustion air is drawn from outside and the room, and loader is executed in front of a cartridge with a maximum length of 35cm. Fireplace ANTEK 10 kW is regulated manually.

CO emissions

0.61 %

Efficiency

61.70 %

Fuel Gas Temperature

352 ° C

Power

10 kW

Surface Heating

100 m²

Incineration

Continuous

Reviews

There are no reviews yet.

Be the first to review “ANTEK 10KW”